In: Categories » Computers and technology » Flash » Transforming the Current Color of a Flash Movie Clip
|
You want to modify a movie clip's color relative to the current color transformation, instead of relative to the author-time color values. Use the getTransform( ) and setTransform( ) methods of the Color object that targets the movie clip. The Color.getTransform( ) method returns the transform object last applied to the targeted movie clip. For example, if you had previously applied a transform object that set the movie clip's alpha percentage to 42, getTransform( ) would return an object with the following values: {ra: 100, rb: 0, ga: 100, gb: 0, ba: 100, bb: 0, aa: 42, ab: 0}
The transform object reflects changes made to a movie clip's color either at authoring time or at runtime. If you modify the color values using the Property inspector at authoring time, those values are indicated in the movie clip's transform object. You can make changes to a movie clip's color at runtime by using the setTransform( ) or setRGB( ) methods of its Color object, and you can adjust the movie clip's _alpha property separately. All runtime changes—not just the changes made using setTransform( )—are reflected in the transform object. If you have not applied any color changes at runtime or authoring time then getTransform( ) returns the following value (a neutral transform object): {ra: 100, rb: 0, ga: 100, gb: 0, ba: 100, bb: 0, aa: 100, ab: 0}
You can modify the properties of the transform object returned by getTransform( ) and then apply the modifications using setTransform( ): // Create the Color object. my_color = new Color(myMovieClip); // Get the transform object. myTransformObject = my_color.getTransform( ); // Set the green percentage of all colors within the movie clip to 50% of the current // value. myTransformObject.ga = 50; // Apply the transform object. my_color.setTransform(myTransformObject); The preceding example retains the previously applied transform values, with the exception of ga, which is set to 50. You can instead increment or decrement the properties relative to their current values: // Get the transform object. myTransformObject = my_color.getTransform( ); // Increment the red, green, and blue offsets by 10 to brighten the object's colors. myTransformObject.rb += 10; myTransformObject.gb += 10; myTransformObject.bb += 10; // Set the transform object. my_color.setTransform(myTransformObject); Transformations applied with setTransform( ) occur relative to the colors in the original movie clip symbol, independent of any previous transformations. In other words, the transformations are not cumulative. We simulated a cumulative transformation by basing the new transformation on the previous values, as returned by getTransform( ).
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
Create a custom MovieClip.drawEllipse( ) method using the Drawing API and invoke it on a movie clip. You can create a method of the MovieClip class to draw an ellipse that is very similar to the drawCircle( ) method. In fact, the drawCircle( ) method is merely a degenerate version of drawEllipse( ), in which the radii in the x and y directions are the same. The custom drawEllipse( ) method accepts four parameters: xRadius The radius of the ellipse in the x direction (major axis). yRadius ...
2. ActionScript: Filling a Shape with a Gradient
Use the beginGradientFill( ) and endFill( ) methods to initiate and close a shape drawn at runtime. In a gradient fill, there is a graded change in colors. Flash supports linear gradients, in which one color fades into the next from left to right. Flash also supports radial gradients, in which the colors radiate out from a center point. You can initiate a gradient-filled shape using beginGradientFill( ) in the same way you initiate a solid-filled shape with beginFill( ). The difference is that the call to beginGradientFill( ) require...
3. Scripting Masks in Flash
Use the Drawing API to create a shape and then use MovicClip.setMask( ) to apply the mask. Masks can be used to create unique shapes or visual effects. For example, you can use masks to create wipes and transitions or interesting animations in which only the masked portion of the artwork is visible at a given time. You can even create masks that change shape over time, and use them to mask bitmapped graphics (in movie clips). You can use any movie clip as a mask of another movie clip using the setMask( ) method. The setMask( ...
4. Drawing a Triangle using ActionScript
Create a custom MovieClip.drawTriangle( ) method using the Drawing API and invoke it on a movie clip. You can determine and plot the vertices of a triangle given the lengths of two sides and the angle between them. This is a better approach than specifying the lengths of the three sides because knowing the lengths of two sides and the angle between them always determines a triangle, whereas three arbitrary sides may not fit together to make a triangle. The custom drawTriangle( ) method accepts six parameters: ab ...
Use the beginFill( ) and endFill( ) methods to initiate and close a shape drawn at runtime. To draw a filled shape, call beginFill( ) prior to any other drawing methods, including the custom methods you have defined such as drawCircle( ) and drawPolygon( ). Invoke endFill( ) after calling other drawing methods to create the shape. You cannot apply a fill to an existing shape drawn at authoring time or runtime. You must invoke beginFill( ) before drawing the shape to be filled. This example creates a solid blue ...
6. Drawing a rectangle using ActionScript
Create a custom MovieClip.drawSimpleRectangle( ) method using the Drawing API and invoke it on a movie clip. To draw a simple rectangle, specify the stroke's attributes using the lineStyle( ) method and then draw four lines using the lineTo( ) method: // Create rectangle_mc with a depth of 1 on the main timeline. _root.createEmptyMovieClip("rectangle_mc", 1); // Specify a one-pixel, solid, black line. rectangle_mc.lineStyle(1, 0x000000, 100); // Draw four lines to form the perimeter ...
7. How to draw a rectangle with rounded corners
You want to draw a rectangle with rounded corners, an offset, or rotation.Create a custom MovieClip.drawRectangle( ) method using the Drawing API and invoke it on a movie clip. The drawSimpleRectangle( ) method is, as the name suggests, quite simple. Let's create a more complex version that also: Draws a rectangle with a specified angle of rotation Let's you specify the rectangle center's coordinates Can draw a rectangle with rounded corners The drawRectangle( ) method accepts...
8. Reusing and Organizing Code in Flash Movies
You want to reuse code that you've created for one project in another Flash movie. Or you want to write your ActionScript code in an external text editor. Place your ActionScript code in external .as files and use the #include directive to add them to your Flash movies: // Adds all the code within MyActionScriptFile.as to your Flash movie. #include "MyActionScriptFile.as" Use the #include directive to incorporate code from external text files into your Flash movie during compilation from a .fla file ...
9. Drawing a Circle using ActionScript
Create a custom MovieClip.drawCircle( ) method using the Drawing API and invoke it on a movie clip. You can create a circle in ActionScript with eight curves. Fewer curves results in a distorted circle and too many curves hinders performance. Let's create a custom method of the MovieClip class for drawing circles. This method, drawCircle( ), allows for three parameters: radius The radius of the circle x The x coordinate of the circle's center point. If undefined, the circle is centered at x =...
10. ActionScript: Repeating a Task at Timed Intervals
You want to perform an action or actions at a specific timed interval. Use the setInterval( ) function. The setInterval( ) function allows you to specify an interval (in milliseconds) at which your Flash movie will invoke a function. Use setInterval( ) to perform a particular action over time but not necessarily at the frequency of the frame rate of the movie. // Define a function. function myIntervalFunction ( ) { // Output the difference between the current timer value and its value from the ...