Things to consider when working with FDDs

written by: Grace Nelson; article published: year 2006, month 12;


In: Categories » Computers and technology » Storage devices » Things to consider when working with FDDs

Keep the following issues in mind when working with FDDs

Choosing

3.5-inch HD FDDs are $10 commodity items made by several manufacturers. We prefer the Teac FD235HF, but there is little difference between brands. Buy whatever is offered. 5.25-inch FDDs are still available, but that won't last forever. If you need a 5.25-inch FDD to rescue data on old disks, get the drive now. If you patronize a local computer store, check there first. They may have a stack of old 5.25-inch FDDs they'd be happy to give away or sell cheaply.

Installing

5.25-inch FDDs require a 5.25-inch half-height, externally accessible drive bay. 3.5-inch FDDs can be installed in an externally accessible 3.5-inch third-height bay, or, by using an adapter, in a 5.25-inch half-height bay. The BIOS automatically detects installed FDDs, but can determine type unambiguously only for 5.25-inch HD (1.2 MB) FDDs, which spin at 360 RPM rather than 300. For other drive types, older machines assume 360 KB or 720 KB and newer systems assume 1.44 MB. Use BIOS Setup to confirm that the drive type is configured correctly.

Cabling

If you add or replace an FDD, also replace the cable, particularly if it is the original cable. Manufacturers often fold and crimp the FDD cable for improved cable routing and airflow. An old cable that has been so treated is no longer reliable, especially after you disturb it to install the new drive.

Change Line Support

All but the oldest FDD controllers use line 34 for Change Line Support. When the FDD door is opened, the FDD signals on line 34 to tell the system that the diskette may have been changed. If you install a 360 KB or 720 KB FDD, verify the Change Line setting, ordinarily set on the drive by a jumper labeled "Line 34" or "Change Line." If you install such a drive in a PC/XT-class system, leave the jumper open. On any later system, install a jumper block to connect line 34 and enable Change Line Support. Failing to do so and then writing to a diskette in that drive may destroy the data on that diskette by overwriting the FATs and root directory entries with data from the diskette that was formerly in the drive.

Cleaning

FDDs are used so little nowadays—an occasional boot or program install—that head wear and media accumulation aren't problematic. Dust needs to be removed periodically. You can buy special FDD cleaning kits, but we don't bother with them. Every few months (or when we open the case for other reasons) we vacuum out the drive and drench it down with Zero Residue Cleaner or rubbing alcohol.

Repairing

Don't. Replace the drive. Modern 3.5-inch drives are so cheap that it makes no sense to repair one, and they are often sealed units without repair access anyway. Older 5.25-inch drives often are repairable, but the cost to do so exceeds the cost of replacing the drive.

legal disclaimer

1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service

Useful tools and features

Translate this article to...    Send this article to you or to a friend

Link to this article from your page   
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.

related articles

1. Diskette Types and Formats
Before a diskette can be used to store data, you must prepare it by formatting it, although many diskettes nowadays come preformatted. Formatting creates the physical tracks and sectors that the drive uses to store data (called low-level or physical formatting) and the logical structure used by the operating system to organize that data (called logical or DOS formatting). Unlike hard disks, which require two separate formatting passes, FDDs perform both physical and logical formatting in one step. Al...

2. Subcodes
Subcode bytes enable the drive to find songs (which are confusingly also called tracks) along the spiral track and also contain or convey additional information about the disc in general. The subcode bytes are stored as 1 byte per frame, which results in 98 subcode bytes for each sector. Two of these bytes are used as start block and end block markers, leaving 96 bytes of subcode information. These are then divided into eight 12-byte subcode blocks, each of which is assigned a letter designation PW. Each subcode channel can hol...

3. High Capacity Magnetic Storage Devices
High-capacity removable media drives are an ever-shrinking category. With competition at the low end (1GB and under capacities) from USB flash memory keychain drives and at higher capacities from external mini-hard disks (4GB and up), rewritable DVD (8.5GB), and larger USB and FireWire hard disks (20GB and up), there are only two current product families, both from Iomega: Zip. Flexible media, with capacities of 100MB, 250MB, and 750MB REV. Rigid media, with capacity of 35GB (native...

4. Handling CD Read Errors
Handling errors when reading a disc was a big part of the original Red Book CD standard. CDs use parity and interleaving techniques called cross-interleave Reed-Solomon code (CIRC) to minimize the effects of errors on the disk. This works at the frame level. When being stored, the 24 data bytes in each frame are first run through a Reed-Solomon encoder to produce a 4-byte parity code called "Q" parity, which then is added to the 24 data bytes. The resulting 28 bytes are then run though another encoder that uses a different scheme...

5. Floppy Drive Types
As distinct from diskette types and formats, six drive types have been installed in PC-compatible systems: 5.25-inch 160/180 KB (SSDD) Single-Sided, Double-Density(SSDD) was the standard FDD in very early PC-class systems. These drives read and write only SSDD diskettes. 5.25-inch 320/360 KB (DSDD) Double-Sided, Double-Density(DSDD) was the standard FDD in PC-class systems, and was often found as a second FDD in early AT and 386 systems. The...

6. How to choose a Tape Backup Drive
Choosing a tape backup drive can be a simple job if you need to back up a single standalone system with a relatively small hard drive. The decision becomes more complex if the system has a larger hard drive or if you must back up a desktop system as well as a laptop. Choosing a tape backup drive type can be an even more complex program if you must back up a network server's hard drives and perhaps even back up the workstations from the server. As you ponder which backup tape drive you should select, consider the following facto...

7. DVD Copy Protection
DVD video discs employ several levels of protection that are mainly controlled by the DVD Copy Control Association (DVD CCA) and a third-party company called Macrovision. This protection typically applies only to DVD-Video discs, not DVD-ROM software. So, for example, copy protection might affect your ability to make backup copies of The Matrix, but it won't affect a DVD encyclopedia or other software application distributed on DVD-ROM discs. Note that every one of these protection systems has been broken, so with a lit...

8. How to Manually Resolve Motherboard Conflicts
In the past, the only way to resolve conflicts manually was to take the cover off your system and start changing switches or jumper settings on the adapter cards. Fortunately, this is a bit easier with plug-and-play because all the configuration is done via the Device Manager software included in the operating system. Although some early plug-and-play cards also had jumper switches or setup options to enable them to be configured manually, this feature was found primarily on ISA PnP-compatible cards. Be sure you write down or print o...

9. Hard Drive Advancements
In 1957, Cyril Northcote Parkinson published his famous compilation of essays titled Parkinson's Law, which begins with the statement, "Work expands so as to fill the time available for its completion." A corollary of Parkinson's most famous "law" can be applied to hard drives: "Data expands so as to fill the space available for its storage." This, of course, means that no matter how big a drive you get, you will find a way to fill it. I know that I have lived by that dictum since purchasing my first hard disk drive more than 2...