In: Categories » Electronics and communication » Mobile cell phones » Short Introduction in Cellular Data Communications
|
One of the oldest services for sending data over a cellular communications network is known as “Cellular Digital Packet Data” (CDPD), which provides a way of passing Internet Protocol (IP) data packets over analog cellular voice networks at speeds of up to 19.2 kbps. Although CDPD employs digital modulation and signal processing techniques, the underlying service is still analog. The medium used to transport data consists of the idle radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. Channel hopping automatically searches out idle channel times between cellular voice calls. Packets of data select available cellular channels and go out in short bursts without interfering with voice communications. Alternatively, cellular carriers also may dedicate voice channels for CDPD trafCELLULAR fic to meet high traffic demand. This situation is common in dense urban environments where cellular traffic is heaviest. Once the user logs onto the network, the connection stays in place to send or receive data. In accordance with the IP, the data are packaged into discrete packets of information for transmission over the CDPD network, which consists of routers and digital radios installed in current cell sites. In addition to addressing information, each IP packet includes information that allows the data to be reassembled in the proper order via the Transmission Control Protocol (TCP) at the receiving end. The transmissions are encrypted over the air link for security purposes. Although CDPD piggybacks on top of the cellular voice infrastructure, it does not suffer from the 3-kHz limit on voice transmissions. Instead, it uses the entire 30-kHz RF channel during idle times between voice calls. Using the entire channel contributes to CDPD’s faster data transmission rate. Forward error correction ensures a high level of wireless communications accuracy. With encryption and authentication procedures built into the specification, CDPD offers more robust security than any other native wireless data transmission method. As with wireline networks, CDPD users also can customize their own end-toend security. To take advantage of CDPD, the user must have an integrated mobile device that operates as a fully functional cellular phone and Internet appliance. For example, the AT&T PocketNet Phone contains both a circuit-switched cellular modem and a CDPD modem to provide users with fast and convenient access to two-way wireless messaging services and Internet information. GTE provides a similar service through its Wireless Data Services. Both companies have negotiated intercarrier agreements that enable their customers to enjoy seamless CDPD service in virtually all markets across the country. AT&T’s Wireless IP service, for example, is available in 3000 cities in the United States. Among the applications for CDPD are access to the Internet for e-mail and to retrieve certain Web-based content. AT&T PocketNet Phone users, for example, have access to two-way messaging, airline flight information, financial information, show times, restaurant reviews, and door-todoor travel directions. AT&T provides unlimited access to featured sites on the wireless Internet, which means that there are no per-minute charges for surfing wireless Web sites. Companies also can use CDPD to monitor alarms remotely, send/receive faxes, verify credit cards, and dispatch vehicles. Although CDPD services might prove too expensive for heavy database access, the use of intelligent agents can cut costs by minimizing connection time. Intelligent agents gather requested information and report back only the results the next time the user logs onto the network. Summary Wireless IP is an appealing method of transporting data over cellular voice networks because it is flexible, fast, widely available, and compatible with a vast installed base of computers and has security features not offered with other wireless data services. One caveat: The carrier’s wireless data network is different from its wireless voice network. Therefore, users of AT&T Digital PocketNet service, for example, will not be able to access that service everywhere voice calls can be made. It is important to look at coverage maps and compare service plans before subscribing to this type of service.
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
related articles
Location-Reporting Technology Mobile phone companies are under orders from the FCC to incorporate location-reporting technology into cellular phones. Dubbed E-911, or enhanced 911, the initiative is meant to provide law enforcement and emergency services personnel with a way to find people calling 911 from mobile phones when callers do not know where they are or are unable to say. Since no carrier was able to make an October 2001 deadline to fully implement E-911, the FCC issued waivers permitti...
2. The Main Protocols used by Mobile Phones (SMS EMS MMS WAP)
Short Message Service (SMS) Short Message Service (SMS) is a text message service that enables the transmission of short messages between a cell phone, PDA, PC, or any device with an Internet protocol (IP) address. Since this service was standardized in the mid 1990s, it has recorded tens of billions of messages and is being used worldwide. SMS was introduced in the Global System for Mobile Communications (GSM) and later adopted by other mobile communication systems such as Time Division Multiple Access (TDM...
3. What is Advanced Mobile Phone Service (AMPS)
Before the age of digital services, the predominant technology for analog cellular phone services in North America adhered to a set of standards for Advanced Mobile Phone Service (AMPS). Originally, AMPS operated in the 800-MHz frequency band using 30-kHz-wide channels. Avariant of AMPS, known as Narrowband AMPS (NAMPS), uses 10-kHz-wide channels and consequently has triple the capacity of AMPS. Although AMPS or a variation of AMPS is still around— chances are that your cellular phone allows you to switch bet...
4. Cordless Telecommunications versus Cellular Phones ~ Advantages and Disadvantages
Although cellular phones and cordless phones are both wireless, they have come to assume quite distinct and separate applications based on their areas of use and the differing technologies developed to meet user requirements. Cellular and cordless are implemented with their own standardsbased technologies. Briefly, cellular telephones are intended for off-site use. The systems are designed for a relatively low density of users. In this environment, macrocellular technology provides wide area coverage and t...
Acellular system operates by dividing a large geographic service area into cells and assigning the same frequencies to multiple, nonadjacent cells. This is known in the industry as “frequency reuse.” As a subscriber travels across the service area, the call is transferred (handed off) from one cell to another without noticeable interruption. All the base stations in a cellular system, including radio towers, are connected to a mobile telephone switching office (MTSO) by landline or microwave links. The MT...
6. What is Code Division Multiple Access and its Features and Options
Code Division Multiple Access (CDMA) is a spread-spectrum technology that is used for implementing cellular telephone service. Spread spectrum is a family of digital communication techniques originally used in military communications and control applications. Spread spectrum uses carrier waves that consume a much wider bandwidth than that required for simple point-to-point communication at the same data rate. This results in the carrier wave looking more like random noise than real communication between a sender and r...
7. Which are the basic Features and Options of a mobile phone
Cellular telephones offer many features and options, including Voice activation Sometimes called “hands-free operation,” this feature allows the user to establish and answer calls by issuing verbal commands. This safety feature enables a driver to control the unit without becoming visually distracted. Memory functions These allow storage of frequently called numbers to simplify dialing. Units may offer as few as 10 memory locations or in excess of 100, depending on model ...
8. M COMMERCE ~ SECURITY PAYS OFF
Providing secure payments and protecting the privacy of an individual’s personal data is critical to the growth of mobile ecommerce, also known as m-commerce. M-commerce may someday provide a true alternative to cash and make purchasing items as easy as hitting a few keys on the keypad of your Wireless Internet device. One of the most important issues to overcome in the area of m-commerce is fraud. It’s easy enough to prove payment in the physical world—cash works well and credit cards have sophisticated prot...










