In: Categories » Electronics and communication » Mobile cell phones » Short Introduction in Cellular Data Communications
|
One of the oldest services for sending data over a cellular communications network is known as “Cellular Digital Packet Data” (CDPD), which provides a way of passing Internet Protocol (IP) data packets over analog cellular voice networks at speeds of up to 19.2 kbps. Although CDPD employs digital modulation and signal processing techniques, the underlying service is still analog. The medium used to transport data consists of the idle radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. Channel hopping automatically searches out idle channel times between cellular voice calls. Packets of data select available cellular channels and go out in short bursts without interfering with voice communications. Alternatively, cellular carriers also may dedicate voice channels for CDPD trafCELLULAR fic to meet high traffic demand. This situation is common in dense urban environments where cellular traffic is heaviest. Once the user logs onto the network, the connection stays in place to send or receive data. In accordance with the IP, the data are packaged into discrete packets of information for transmission over the CDPD network, which consists of routers and digital radios installed in current cell sites. In addition to addressing information, each IP packet includes information that allows the data to be reassembled in the proper order via the Transmission Control Protocol (TCP) at the receiving end. The transmissions are encrypted over the air link for security purposes. Although CDPD piggybacks on top of the cellular voice infrastructure, it does not suffer from the 3-kHz limit on voice transmissions. Instead, it uses the entire 30-kHz RF channel during idle times between voice calls. Using the entire channel contributes to CDPD’s faster data transmission rate. Forward error correction ensures a high level of wireless communications accuracy. With encryption and authentication procedures built into the specification, CDPD offers more robust security than any other native wireless data transmission method. As with wireline networks, CDPD users also can customize their own end-toend security. To take advantage of CDPD, the user must have an integrated mobile device that operates as a fully functional cellular phone and Internet appliance. For example, the AT&T PocketNet Phone contains both a circuit-switched cellular modem and a CDPD modem to provide users with fast and convenient access to two-way wireless messaging services and Internet information. GTE provides a similar service through its Wireless Data Services. Both companies have negotiated intercarrier agreements that enable their customers to enjoy seamless CDPD service in virtually all markets across the country. AT&T’s Wireless IP service, for example, is available in 3000 cities in the United States. Among the applications for CDPD are access to the Internet for e-mail and to retrieve certain Web-based content. AT&T PocketNet Phone users, for example, have access to two-way messaging, airline flight information, financial information, show times, restaurant reviews, and door-todoor travel directions. AT&T provides unlimited access to featured sites on the wireless Internet, which means that there are no per-minute charges for surfing wireless Web sites. Companies also can use CDPD to monitor alarms remotely, send/receive faxes, verify credit cards, and dispatch vehicles. Although CDPD services might prove too expensive for heavy database access, the use of intelligent agents can cut costs by minimizing connection time. Intelligent agents gather requested information and report back only the results the next time the user logs onto the network. Summary Wireless IP is an appealing method of transporting data over cellular voice networks because it is flexible, fast, widely available, and compatible with a vast installed base of computers and has security features not offered with other wireless data services. One caveat: The carrier’s wireless data network is different from its wireless voice network. Therefore, users of AT&T Digital PocketNet service, for example, will not be able to access that service everywhere voice calls can be made. It is important to look at coverage maps and compare service plans before subscribing to this type of service.
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
Before the age of digital services, the predominant technology for analog cellular phone services in North America adhered to a set of standards for Advanced Mobile Phone Service (AMPS). Originally, AMPS operated in the 800-MHz frequency band using 30-kHz-wide channels. Avariant of AMPS, known as Narrowband AMPS (NAMPS), uses 10-kHz-wide channels and consequently has triple the capacity of AMPS. Although AMPS or a variation of AMPS is still around— chances are that your cellular phone allows you to switch bet...
2. Cordless Telecommunications versus Cellular Phones ~ Advantages and Disadvantages
Although cellular phones and cordless phones are both wireless, they have come to assume quite distinct and separate applications based on their areas of use and the differing technologies developed to meet user requirements. Cellular and cordless are implemented with their own standardsbased technologies. Briefly, cellular telephones are intended for off-site use. The systems are designed for a relatively low density of users. In this environment, macrocellular technology provides wide area coverage and t...
3. What are Cell Sites
Acellular system operates by dividing a large geographic service area into cells and assigning the same frequencies to multiple, nonadjacent cells. This is known in the industry as “frequency reuse.” As a subscriber travels across the service area, the call is transferred (handed off) from one cell to another without noticeable interruption. All the base stations in a cellular system, including radio towers, are connected to a mobile telephone switching office (MTSO) by landline or microwave links. The MT...
4. What is Code Division Multiple Access and its Features and Options
Code Division Multiple Access (CDMA) is a spread-spectrum technology that is used for implementing cellular telephone service. Spread spectrum is a family of digital communication techniques originally used in military communications and control applications. Spread spectrum uses carrier waves that consume a much wider bandwidth than that required for simple point-to-point communication at the same data rate. This results in the carrier wave looking more like random noise than real communication between a sender and r...
Cellular telephones offer many features and options, including Voice activation Sometimes called “hands-free operation,” this feature allows the user to establish and answer calls by issuing verbal commands. This safety feature enables a driver to control the unit without becoming visually distracted. Memory functions These allow storage of frequently called numbers to simplify dialing. Units may offer as few as 10 memory locations or in excess of 100, depending on model ...
6. M COMMERCE ~ SECURITY PAYS OFF
Providing secure payments and protecting the privacy of an individual’s personal data is critical to the growth of mobile ecommerce, also known as m-commerce. M-commerce may someday provide a true alternative to cash and make purchasing items as easy as hitting a few keys on the keypad of your Wireless Internet device. One of the most important issues to overcome in the area of m-commerce is fraud. It’s easy enough to prove payment in the physical world—cash works well and credit cards have sophisticated prot...
7. TRENDS IN NEXT GENERATION MOBILE COMMUNICATIONS
Shortly after cellular first launched, third-party entrepreneurs began offering modems for cellular data transmission. These modems resemble the standard analog modems circa 1985. They transmitted data at 300 baud, used a special cellular protocol called MNP-10, and an AT command set. MNP-10 made these modems different from regular modems because they had to be fault-tolerant to cellular hand-offs and the in-band signaling tones used in analog cellular. One such modem was created by a Dallas, Texas company, Spectrum Cellular, th...
8. MULTIMEDIA MESSAGING MMS
One of the Wireless Internet technologies is Multimedia Messaging (MMS). MMS is an application that uses a data call to a wireless device that delivers a message capable of incorporating any of the following in an organized and choreographed presentation: • Pictures • Data • Text • Audio • Video • Voice Whereas SMS messaging typically uses a digital control channel, MMS is on...
9. Cellular and PCS based Technologies
Cellular and PCS telephones will be the predominant mobile communications technologies for the foreseeable future. This does not mean to imply that cellular is superior to other technologies, only that it is more prevalent. With nearly 1 billion users worldwide, there is no close second. These mobile technologies are currently facing a major evolution in many areas, however, including the technical and business sectors, because they provide the economical means for realization of not only mobile computing, but also many other applicat...
10. CELLULAR DATA MODEM TECHNOLOGIES
Today’s cellular technology offers several different methods for data communications—an internal modem with built-in browser, an internal modem with an external port for connection (typically RS-232 or infrared (IR) to computer, or internal SMS messaging. Modems fall into two categories: CDPD or traffic channel. CDPD offers true packet data communications at 19.2 Kbps whereas modems using the traffic channels are limited to the maximum rate for a traffic channel ( 14.4 Kbps, depending on the standard). Future 2.5G...