In: Categories » Home and family » Interior decorating and repair » Print ready vector plastic card design guide
| For graphic designers, it is important that you deliver finalartwork in a print ready status to your client. There are several important points for your attention. I am eason, have worked in the artwork department of a card printing factory for a couple of years. So i know a little bit about the print ready artwork process. So i come here to shear my experience with your guys, especially for the freshmen in this field. I am not a native english speaker, so it must be a lot mistakes in my writing. Please understand. Thanks. Ok, let start now. 1. Software, file format: Most plastic card manufacture use coreldraw and illustrator. They accept various file format like: .cdr, .ai,. eps,.tif...etc. Personally i recommend cdr or ai version. Many people export file in pdf, but for some special effect in the artwork, it may affected after plasticcardonline printer import artwork into their software. So it is best that you can supply a very "original" artwork.2. Vector or bitmap: This is always a very tuff thing for plasticcardonline printers. Many clients supply low resolution photos (Below 300dpi), usually it looks blur in monitor, these files is not good for full colour plasticcard printing. According to my experience, if the photo is small sized one, resolution is not a big problem, some times 72dpi also works. As client like get photo from internet, these photos are always low res at bout 72dpi. If shrink the size to 25% the resolution will be enough. When you design an artwork it is ok to keep photos as bitmap, but make sure the rest text and colored blocks/shapes/linearts are vector. It for the best result for printing, vector artwork can make the printed shapes very sharp and clear. And another thing you need pay attention is if client supply logo as a low resolution jpg file. You have to recreate it , make it vector. No body want their logo unreadable. 3. CMYK,RGB, Spot color: For printing CMYK is the most popular setting. RGB is for web, never use it. And some clients need accurate color, so you have to use spot color for pantone match. 4. Text and font: As i mentioned above. Text must be vector to make sure the best result for printing. You must pay attention when you exporting finalartwork, all fonts must be converted into outlines. Or you must supply used font with artwork. Otherwise, when the plasticcardonline printer open your artwork, the font will change. That is very dangerous. Not only the font, as it changes, the layout may also be affected. So this is quite important and always ignored by some designers. And for some artwork, even it is confirmed currently, you or your client may change the text contact in the near future. For this consideration, do not outline the text, store the font file with artwork. This can save a lot of time. Other wise you may never know what font is. 5. Bleed!Bleed!Bleed! This is the most common mistake for new designers, artwork for plastic card must be NO LESS THAN 3mm. The bleed area must be consolidate with the main artwork , this area will me cut off. When factory do cutting, they can not always cut very accurate. So make sure text, logo never too close to the edge of the card. The following size spec may helps. And if you need vector coreldraw template file, you can download here.
6. Corpmark, cutline: Make sure finalartwork has corp mark shown on artwork, it helps your plasticcard manufacturer locate the cutlines. 7. Signature stirp, mag strip, embossing, sequential number: When you do design, if it has embossing like membership cards. Pay attention to the back, so that embossing area will not affect the signature on the back if it has one. Same are the texts. Embossing text font name is OCR. Thermal printed sequential number is black only. So need pay attention to the background color. If it is too dark, add a white square. Embossing can be gold, silver,black tipped. 8. Silver foil, UV: If you want add silver foil/UV to the plasticcard. Make a separate layer with corp mark. Solid black, so the plasticcardonline printer can locate it correctly. That all i have recently , i will keep updating this guide hope it is helpful with the new guys. Any body who want to give me suggestions or need help , please email me: artwork at plasticcardonline dot com.
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
Think of your toolbox as the first aid kit for your home. You’ll keep your house “healthy” and save yourself both time and money if you’re prepared to tackle at least the smaller jobs on your own. Here’s advice from a Home Depot tool expert on what to buy and approximately how much to spend on each item. THE BASICS 1. Hammer. Heft a few until you find one that feels comfortable in your hand and seems to have a good balance when you raise it to swing. If you choose a wooden-handled hammer, look for a cast, rather than forged...
2. Spring Home Maintenance Checklist
When those first crocuses appear above the soil and visions of barbecues and bathing suits begin to dance in your head, pull out this checklist. It will help you locate any winter damage that needs attention and guide you in preparing your home for the warmer season. OUTSIDE THE HOUSE 1. Remove and store storm windows. 2. Repair and install window screens. 3. Recheck caulking around doors and windows. 4. Inspect porch, steps, driveway, patio, and any other concrete surfaces for cracks. 5. Inspe...
3. How to Hire a Contractor or Roofer
Remodeling and reroofing are among the largest cash outlays you will make on your home. And if you make a mistake in hiring, you may do serious damage to your home, your finances, and your nerves. The secret to getting a job done well and on budget is to find a professional with a succession of happy clients to his name and then check him out as if he were proposing to your daughter. Here’s how: 1. Get referrals. Ask family and friends who’ve had work done on their houses for names of professionals they were satisfied with. If...
4. Hardy Houseplants
Placing a few green plants around your home or office can brighten any room dramatically. But it only takes one or two droopy or brown plants to quickly achieve the opposite effect. If this is a familiar scenario, take heart. The key to consistently flourishing flora lies in selecting plants that can survive the conditions you’re able to provide. This may mean choosing plants that prefer low light, or sticking with plants that don’t insist on regular watering, if you’re forgetful. Here are eight hardy plants and a few suggestions about suppl...
5. First Aid for Dying Plants
The secret to keeping plants alive is to recognize what’s killing them and fix it fast. This checklist describes the most common houseplant killers, helps you recognize symptoms, and explains how to apply a remedy before it’s too late. 1. Overwatering. This is the single most common cause of death for houseplants and generally happens for one of two reasons. Most often, we’re overly affectionate, giving plants too much of what they need. Sometimes, we’re overly efficient, regularly, but lethally, giving every plant the ...
6. Fall A Home Maintenance Checklist
Squirrels do it, birds do it—and you should do it too: make your nest warm, safe, and snug before the chills of winter set in. OUTSIDE THE HOUSE 1. Prune tree branches that touch the house. 2. Clean rain gutters and install wire strainers (to save yourself the trouble next year). 3. Clean and store outdoor furniture. 4. Remove window screens. 5. Put up storm windows. 6. Check windows for needed putty, weather stripping, or caulking. 7. Inspect roof for loose or missing shingles....
7. DO IT YOURSELF: FURNITURE REPAIR
Do it Yourself: 1) Wax your furniture- to build up the finish, cover scratches or damages, and to obtain a more durable and long-lasting improvement than oil polish. Apply a hard paste wax with 0000 steel wool using a few drops of water to help emulsify the wax, and apply it as thinly as possible, rubbing with the grain of the wood. When finished applying the wax, let it dry and harden for an hour or so, then wipe off all excess wax with a clean, unused dry steel wool pad. Complete the waxing by buffing with a clean pure cotton...
8. Guide to Stain and Spot Removal from Carpets and Upholstery
This is a general guide to spot and stain removal for common household stains. The guide is separated into categories of stains and the recommended procedures for that category. Please note that this guide is only to be used for recommendations and is not in any way comparable to professional spot removal. Some cleaning agents have health risks, and can cause carpets to discolor, delaminate, or even dissolve the fibers. With that said, Proceed at your own risk, and when in doubt, it’s always best to hire ...
9. Rug Styles
Getting the right blend of decor for your living room is something that we all struggle with from time to time. With a bewildering array of information and advice out there about what kind of furnishings to use, what colours are available and so on it’s easy to throw your hands in the air and say “I give up!!”. But don’t despair – you don’t have to change everything about a room in order to change its look. If stripping wallpaper and repainting is too onerous, or if buying a whole new furnitu...
10. Ways of Home Interior Decorating
Small spaces generally have a cozier and warm feel than large spaces. It is very easy to enhance this coziness with warm colors and lots of draperies and decorative pillows. It is also possible to give small room an airier and wider feel. The best idea to visually enlarge your room is to use light and bright colors. Cool colors as green and blue tend to recede from the eye and therefore give a larger feel to a room. This effect can be enhanced by painting the trims, borders and moldings in a lighter color than the walls. This ...