PC Cards types; How to add and remove PC Cards from a mobile computer

written by: Alan Stark; article published: year 2006, month 10;


In: Categories » Electronics and communication » Wireless and mobile computing » PC Cards types; How to add and remove PC Cards from a mobile computer

Unlike desktop PCs, portable systems don’t have standard expansion slots for the peripheral device connections. The expansion slots in a desktop computer allow additional devices to be attached to the computer. However, due to size and weight constraints, these slots are not available in the portable computers. Instead, they have expansion slots called PC Card slots or Personal Computer Memory Card International Association (PCMCIA) slots. PC Cards that can be inserted in these slots resemble a credit card in appearance and size, though they’re slightly thicker. Originally, these slots were intended for memory expansion. But now, such devices as hard disks, CD-ROM, LAN cards, and modems can also be connected using these slots.

A PC Card may have a data cable to the external power supply. For example, the card for a CD-ROM drive must be connected to a wall outlet for power supply. If the card doesn’t contain the data cable, the care is self-contained, like a modem card that draws power from the battery instead of an AC outlet. Depending on the size and number of connectors on the card, there are three standards for the PC Card slots:

Type I. Up to 3.3 mm thick, with a single row of sockets. These usually add Static RAM (SRAM) to the portable system.

Type II. Up to 5.5mm thick, with two rows of sockets and a pop-out RJ-45 or RJ-11 connector. These add modems and NICs to the portable system.

Type III. Up to 10.5 mm thick, with three rows of sockets. These connect hard disk drives and adapters for CD-ROM, DVD, and tape drives. Often, each type of slot is included in a portable PC. For better performance, look for a PCMCIA specification called CardBus slot. It’s the latest slot type, and it increases I/O speed and supports 32-bit buses and low voltage. To support PC Cards, the operating system in the portable computer must provide two services:

1. Socket service. A BIOS-level service detects when a PC Card is inserted into or removed from the system and manages the sockets.

2. Card service. This service provides the interface between the card and the device driver when the socket is closed. It manages the assignment and allocation of the system resources, such as I/O addresses and IRQs, to the PC Card.

Adding a PC card

One of the most popular features of a PC Card is hot swapping. This allows you to install a device while a computer is still running. The computer recognizes the device without rebooting. With this feature, you can remove a card and insert another without switching off the machine.

The steps for adding or installing a PC Card are:

1. Insert the card in the slot. Make sure that the notched edge of the card goes in first. Don’t use extra pressure or force while inserting the card. You may damage the card and the slot.

2. Press the card into the connector so that it’s firmly in place. If the card is installed correctly, the Eject button (either inside the PCMCIA opening or on the side of computer next to the slot) pops out.

3. If a device driver comes with the card, install the driver.

Removing a PC Card

To remove a PC Card, press the Eject button. The card pops out. If it doesn’t, either refer to the user manual or contact the support personnel. Do not use the end of a paper and stick it in the slot. Portable computers are not as sturdy as desktop computers.

Make sure that any slots that aren’t used are closed or sealed. The slot connectors are very small. Small amounts of dust can cause big trouble.

legal disclaimer

1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service

Useful tools and features

Translate this article to...    Send this article to you or to a friend

Link to this article from your page   
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.

related articles

1. How Do I Share Pictures on the Web
A popular way to electronically share pictures these days is via online photo services that publish web page galleries of your images. Only a few years ago, setting up an online gallery was a cumbersome process requiring some knowledge of web page design. But easy-to-use online services such as Flickr have streamlined this process so that anyone with an Internet connection can publish photos. In addition to sharing pictures, these services allow you to write short captions, add titles, and even include "tags" that serv...

2. Wireless Attacks ~ Jamming (Denial of Service)
Denial-of-service (DoS) attacks are those that prevent the proper use of functions or services. Such attacks can also be extrapolated to wireless networks. To understand this, we must first consider how wireless 802.11b networks operate, and over what frequencies. Effectively attacking (or securing) a wireless network requires a certain level of knowledge about how radio transmitters, frequencies, and wavelengths work and relate to each other. In the United States, the FCC governs frequencies and their allocation. Devices...

3. Wireless Communication Platforms for LANS
Despite the prevalence of standards committees in the wireless industry, there is no single unifying standard. It is important for enterprises to consider all the aspects involved in mobile support while contemplating a strategy for mobile e-commerce. Some of the key criteria in choosing a wireless network specification include: Average size of transfers Number of devices in the wireless network Others Range of transmission Secur...

4. Wireless Attacks ~ War Driving
When a surveillance attack is either impossible or too difficult, war driving is an effective alternative. In many situations, war driving follows and adds information to a prior surveillance attack. Conversely, the information obtained from random war driving often leads to a surveillance attack on a discovered location. The term war driving is borrowed from the 1980s phone hacking tactic known as war dialing. War dialing involves dialing all the phone numbers in a given sequence to search for modems. In fact, this method of ...

5. How To Get Photo Quality Prints
There are a variety of ways to get photo-quality prints from your digital images. You can make them yourself with a printer at home, or have a photo finisher do the work for you. Many camera stores offer photo finishing from digital images. Simply take in your memory card, order the prints, and pick them up the next day. This service is now available in most drugstore chains, too—instead of dropping off a roll of film while running your errands, you leave them your memory card instead. You can also order prints throu...

6. Wireless Privacy Protocols ~ WEP detailed
The Wired Equivalent Privacy protocol is incorporated as part of the IEEE 802.11b protocol. Actually, the standard only calls for 40-bit WEP, but almost all vendors offer up to 128-bit WEP. To secure data, WEP uses the RC4 algorithm to encrypt the packets of information as they are sent out from the access point or wireless network card. This is the same algorithm used in many other Internet applications that require security, such as Secure Sockets Layer (SSL). SSL is the most common protocol used by online stores to e...

7. Wireless Attacks ~ Rogue Access Points
Rogue access points are those connected to a network without planning or permission from the network administrator. For example, we know one administrator in Dallas who just did his first wireless security scan (war driving) on his eight-building office campus. To his surprise, he found over thirty access points. Worse, only four of them had authorization to be connected to the network. Needless to say, heads rolled. Rogue access points are becoming a major headache in the security industry. With the price of low-end ac...

8. Wireless Network Protocols ~ Advantages and Disadvantages of Bluetooth
There are various wireless communication protocols. These technologies range in scope from long distance WLANs to one-meter IrDA devices. Each of these technologies has its niche, as well as its attendant strengths and weaknesses. For example, WLANs enable the transmission of data up to several hundred feet, but often require manual configuration changes that are difficult to implement. On the other hand, IrDA permits a seamless connection between devices without the need for extra configuration. However, their usability is de...

9. Wireless Network Protocols ~ Understanding HomeRF and IrDA
About the same time WECA approved the 802.11 standard, several other types of wireless technologies were being introduced. Although a few have made a rather impressive niche in the Personal Area Network (PAN) market, the only other WLAN technology that came close to competing with 802.11 was HomeRF. Using the Shared Wireless Access Protocol (SWAP), HomeRF merges the 802.11 FHSS standard with the six voice channels based on Digital Enhanced Cordless Telecommunications (DECT). In other words, the home network included both ...

10. WLAN Broadcasting ~ MiniStumbler ~ a wireless network scanner
MiniStumbler is a very user-friendly wireless network scanner that listens for beacon signals coming from open and broadcasting WLANs. In addition, this program will provide a plethora of information that makes it very useful for both hackers and the security professionals. As you will see, MiniStumbler might be small, but it packs a load of power in its functionality. Installing MiniStumbler MiniStumbler is a basic one-file program that simply needs to be downloaded, unzipped, and placed in the My Documents sha...