In: Categories » Computers and technology » Memory Processor Motherboards and buses » Motherboard Form Factors
|
Without a doubt, the most important component in a PC system is the main board or motherboard. Virtually every internal component in a PC connects to the motherboard, and its features largely determine what your computer is capable of, not to mention its overall performance. Although I prefer the term motherboard, other terms such as main board, system board, and planar are interchangeable. This article examines the various types of motherboards available and those components typically contained on the motherboard and motherboard interface connectors. Several common form factors are used for PC motherboards. The form factor refers to the physical dimensions (size and shape) as well as certain connector, screw hole, and other positions that dictate into which type of case the board will fit. Some are true standards (meaning that all boards with that form factor are interchangeable), whereas others are not standardized enough to allow for interchangeability. Unfortunately, these nonstandard form factors preclude any easy upgrade or inexpensive replacement, which generally means they should be avoided. The more commonly known PC motherboard form factors include the following:
Motherboards have evolved over the years from the original Baby-AT form factor boards used in the original IBM PC and XT to the current BTX and ATX boards used in most full-size desktop and tower systems. ATX has a number of variants, including microATX (which is a smaller version of the ATX form factor used in the smaller systems) and FlexATX (an even smaller version for the lowest-cost home PCs and some smallform-factor corporate PCs). The newest form factor, BTX, relocates major components to improve system cooling and incorporates a thermal module. BTX also has smaller microBTX and picoBTX variations. Another small form factor called Mini-ITX is also available; it's really just a minimum-size version of FlexATX designed for very small systems. NLX is designed for corporate desktoptype systems but has largely been replaced by FlexAXT; WTX was designed for workstations and medium-duty servers, but never became popular.
Although the Baby-AT, Full-size AT, and LPX boards were once popular, they have been replaced by more modern and interchangeable form factors. The modern form factors are true standards that provide improved interchangeability within each type. This means one brand of ATX boards can interchange with other brand ATX boards, BTX with other BTX, and so on. The additional features found on these boards as compared to the obsolete form factors, combined with true interchangeability, has made the migration to these newer form factors quick and easy. Today I recommend purchasing only systems with one of the modern industry-standard form factors. Each of these form factors, however, is discussed in more detail in the following sections. Anything that does not fit into one of the industry-standard form factors should be considered proprietary. Unless there are special circumstances, I do not recommend purchasing systems with proprietary board designs. They will be virtually impossible to upgrade and very expensive to repair later because the motherboard, case, and often power supply will not be interchangeable with other models. I call proprietary form factor systems "disposable" PCs because that's what you must normally do with them when they are too slow or need repair out of warranty. Advice: "Disposable" PCs might be more common than ever. Some estimate that as much as 60% of all PCs sold today are disposable models, not so much because of the motherboards used, but because of the tiny power supplies and cramped micro-tower cases that are favored on most retail-market PCs today. Although low-cost PCs using small chassis and power supplies are theoretically more upgradeable than past disposable type systems, you'll still hit the wall over time if you need more than three expansion slots or want to use more than two or three internal drives. Because mini-tower systems are so cramped and limited, I consider them to be almost as disposable as the LPX systems they have largely replaced. You also need to watch out for systems that only appear to meet industry standards, such as certainDell computer models built from 1996 to the presentespecially the XPS line of systems. These computers often use rewired versions of the ATX power supply (or even some that are completely nonstandard in size and shape) and modified motherboard power connectors, which makes both components completely incompatible with standard motherboards and power supplies. In some of the systems, the power supply has a completely proprietary shape as well and the motherboards are not fully standard ATX either. If you want to upgrade the power supply, you must use a special Dell-compatible power supply. And if you want to upgrade the motherboard (assuming you can find one that fits), you must buy a standard power supply to match. The best alternative is to replace the motherboard, power supply, and possibly the case with industry-standard components simultaneously. If you want to have a truly upgradeable system, insist on systems that use ATX or BTX motherboards in a mid-tower or larger case with at least five drive bays.
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
Originally, systems had memory installed via individual chips. They are often referred to as dual inline package (DIP) chips because of their designs. The original IBM XT and AT had 36 sockets on the motherboard for these individual chips; then more of them were installed on the memory cards plugged into the bus slots. I remember spending hours populating boards with these chips, which was a tedious job. Besides being a time-consuming and labor-intensive way to deal with memory, DIP chips had one notorious problemthey crept out of th...
2. The evolution of Microprocessors from 1971 to the Present
It is interesting to note that the microprocessor had existed for only 10 years prior to the creation of the PC! Intel invented the microprocessor in 1971; the PC was created by IBM in 1981. Now more than 20 years later, we are still using systems based more or less on the design of that first PC. The processors powering our PCs today are still backward compatible in many ways with the 8088 that IBM selected for the first PC in 1981. November 15, 2001 marked the 30th anniversary of the microprocessor, and in those 30 years processor ...
3. RDRAM
Rambus DRAM (RDRAM) is a fairly radical memory design found in high-end PC systems from late 1999 through 2002. Intel signed a contract with Rambus in 1996 ensuring it would support RDRAM into 2001. After 2001, Intel continued to support RDRAM in existing systems, but new chipsets and motherboards primarily shifted to DDR SDRAM, and all future Intel chipsets and motherboards are being designed for either conventional DDR or the newer DDR2 standard. RDRAM standards had been proposed that will support faster processors through 2006; however, w...
4. Processor Codenames
Intel, AMD, and Cyrix have always used codenames when talking about future processors. The codenames usually are not supposed to become public, but they typically do. They can often be found in online and print news and magazine articles talking about future-generation processors. Sometimes, they even appear in motherboard manuals because the manuals are written before the processors are officially introduced. Processor Coden...
The term Upper Memory Area (UMA) describes the reserved 384KB at the top of the first megabyte of system memory on a PC/XT and the first megabyte on an AT-type system. This memory has the addresses from A0000 through FFFFF. The way the 384KB of upper memory is used breaks down as follows: The first 128KB after conventional memory is called video RAM. It is reserved for use by video adapters. When text and graphics are displayed onscreen, the data bits that make up those images reside in this space. Video RAM is allotted t...
6. Memory Basics ~ ROM DRAM SRAM Cache Memory
Memory is the workspace for the computer's processor. It is a temporary storage area where the programs and data being operated on by the processor must reside. Memory storage is considered temporary because the data and programs remain there only as long as the computer has electrical power or is not reset. Before being shut down or reset, any data that has been changed should be saved to a more permanent storage device (usually a hard disk) so it can be reloaded into memory in the future. Memory often is called RAM, for random acce...
7. What are Dual Core Processors. Advantages of Dual Core Processor
No matter how fast a conventional single-core processor operates or how much RAM is installed in a system, it must ensure that each program and process that is running is properly serviced. As more and more programs are opened, the amount of time the processor can devote to each program is reduced. The result is that system performance declines. Workstations and servers have long enjoyed the benefits of multiple processors, including better responsiveness when multitasking, faster performance in single multithreaded applications, and better ...
8. How to install RAM Upgrades
Adding memory to a system is one of the most useful upgrades you can perform and also one of the least expensiveespecially when you consider the increased capabilities of Windows 9x/Me, Windows NT/2000/XP, and Linux when you give them access to more memory. In some cases, doubling the memory can practically double the speed of a computer. The following sections discuss adding memory, including selecting memory chips, installing memory chips, and testing the installation. Upgrade Options and Strategies...