In: Categories » Computers and technology » Storage devices » Magneto Optical Drives
|
One of the most neglected types of removable-drive technologies is the magneto-optical (MO) drive. Introduced commercially in 1985, magneto-optical drives are now available in capacities exceeding 9GB. Two sizes of magneto-optical media and drives are available for desktop computers: 3 1/2" and 5 1/4". The 3 1/2" drives have capacities up to 2.3GB, and the 5 1/4" drives have capacities up to 9.1GB. 12" MO drives are also available for enterprise systems. Originally, magneto-optical drives were strictly WORM (write once, read many) drives that produced media that could be added to but not erased. WORM drives are still available on the market, but for desktop computer users, read/write MO drives are preferable. Magneto-Optical TechnologyAt normal temperatures, the magnetic surface of an MO disk is very stable, with archival ratings of up to 30 years. One surface of an MO disk faces a variable-power laser, whereas the other surface of the disk faces a magnet. Both the laser beam and the magnet are used to change the data on an MO disk. The "optical" portion of an MO drive is the laser beam, which is used at high power during the erasing process to heat the destination area of the MO drive to a temperature of about 200° Celsius (the Curie point, at which a normally magnetic surface ceases to be magnetic). This enables any existing information in that area to be erased by a uniform magnetic field, which doesn't affect the other portions of the disk that are at normal temperature. Next, the laser beam and magnetic field are used together to write information to the location by applying high power to the laser and applying a controlled magnetic signal to the media to change it to either a binary 0 or 1. During the read process, the laser is used at low power to send neutrally polarized light to the surface of the MO disk. The areas of the MO disk that store binary 0s reflect light at a polarization angle different from those that store binary 1s. This difference of one degree is called the Kerr effect. In older MO drives, the erase and write process involved two separate operations, but most recent MO drivesstarting with the Plasmon DW260 of 1997use the LIMDOW method (light intensity modulated direct overwrite) for a single-pass operation with some media types. LIMDOW drives use magnets built in to the disk itself, rather than separate magnets as in older MO drives. LIMDOW drives are fast enough to store MPEG-2 streaming video and make achieving higher capacities easier. MO drives are available from many manufacturers at a variety of price points. Most internal MO drives connect to SCSI interfaces. ATAPI/IDE models are sold by some vendors but aren't as easy to find, and external MO drives are available in SCSI, USB 2.0, and IEEE 1394a interfaces. Comparing MO to "Pure" Magnetic MediaCompared to most high-capacity removable-media drives, MO drive hardware is more expensive (especially in the 5 1/4" media size), but media costs are far less per MB, durability is far better, and performance is as good as or better than the 200MB-or-under class magnetic removable-media drives. The use of SCSI interfaces for most models was a drawback when MS-DOS/Windows 3.1 were the leading operating systems, but Windows 9x/Me/NT/2000/XP have much easier SCSI installation processes, and SCSI interfaces have dropped in price (and are included with some internal drives). IEEE 1394a and Hi-Speed USB (USB 2.0) interfaces available on some models allow the easiest installation process of all for external drives. If you can afford the high initial cost of the 5 1/4" media MO drives, you'll have a fairly fast, durable, long-term storage solution that's also a good storage area for works in progress.
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
Before a diskette can be used to store data, you must prepare it by formatting it, although many diskettes nowadays come preformatted. Formatting creates the physical tracks and sectors that the drive uses to store data (called low-level or physical formatting) and the logical structure used by the operating system to organize that data (called logical or DOS formatting). Unlike hard disks, which require two separate formatting passes, FDDs perform both physical and logical formatting in one step. Al...
2. Subcodes
Subcode bytes enable the drive to find songs (which are confusingly also called tracks) along the spiral track and also contain or convey additional information about the disc in general. The subcode bytes are stored as 1 byte per frame, which results in 98 subcode bytes for each sector. Two of these bytes are used as start block and end block markers, leaving 96 bytes of subcode information. These are then divided into eight 12-byte subcode blocks, each of which is assigned a letter designation PW. Each subcode channel can hol...
3. High Capacity Magnetic Storage Devices
High-capacity removable media drives are an ever-shrinking category. With competition at the low end (1GB and under capacities) from USB flash memory keychain drives and at higher capacities from external mini-hard disks (4GB and up), rewritable DVD (8.5GB), and larger USB and FireWire hard disks (20GB and up), there are only two current product families, both from Iomega: Zip. Flexible media, with capacities of 100MB, 250MB, and 750MB REV. Rigid media, with capacity of 35GB (native...
4. Handling CD Read Errors
Handling errors when reading a disc was a big part of the original Red Book CD standard. CDs use parity and interleaving techniques called cross-interleave Reed-Solomon code (CIRC) to minimize the effects of errors on the disk. This works at the frame level. When being stored, the 24 data bytes in each frame are first run through a Reed-Solomon encoder to produce a 4-byte parity code called "Q" parity, which then is added to the 24 data bytes. The resulting 28 bytes are then run though another encoder that uses a different scheme...
As distinct from diskette types and formats, six drive types have been installed in PC-compatible systems: 5.25-inch 160/180 KB (SSDD) Single-Sided, Double-Density(SSDD) was the standard FDD in very early PC-class systems. These drives read and write only SSDD diskettes. 5.25-inch 320/360 KB (DSDD) Double-Sided, Double-Density(DSDD) was the standard FDD in PC-class systems, and was often found as a second FDD in early AT and 386 systems. The...
6. How to choose a Tape Backup Drive
Choosing a tape backup drive can be a simple job if you need to back up a single standalone system with a relatively small hard drive. The decision becomes more complex if the system has a larger hard drive or if you must back up a desktop system as well as a laptop. Choosing a tape backup drive type can be an even more complex program if you must back up a network server's hard drives and perhaps even back up the workstations from the server. As you ponder which backup tape drive you should select, consider the following facto...
7. DVD Copy Protection
DVD video discs employ several levels of protection that are mainly controlled by the DVD Copy Control Association (DVD CCA) and a third-party company called Macrovision. This protection typically applies only to DVD-Video discs, not DVD-ROM software. So, for example, copy protection might affect your ability to make backup copies of The Matrix, but it won't affect a DVD encyclopedia or other software application distributed on DVD-ROM discs. Note that every one of these protection systems has been broken, so with a lit...