In: Categories » Computers and technology » Storage devices » Introduction in the Microdrive Technology
|
If you prefer magnetic storage for digital camera or other electronic device data storage, consider the Hitachi Microdrive, originally developed by IBM and now manufactured and sold by Hitachi Global Storage Technologies. The Hitachi Microdrive has also been sold by various other companies under OEM agreements. The Microdrive is a true hard disk that spins at 3,600RPM and features a 128KB cache buffer. Since its introduction by IBM, the Microdrive in its Compact Flash Type II-compatible form factor has increased in capacity from 170MB up to 6GB. These drives are available in travel kits and can be used with many digital cameras and other devices that are compatible with Compact Flash Type II cards. All Microdrives using the CF Type II interface, including the current 3K4 and 3K6 models shown in the table above weigh 16g with dimensions of 42.8x36.4x5mm. Tip Hitachi uses a standard formula for its Microdrive model numbers. Use this information to quickly identify the features of a particular Microdrive model. For example, a Microdrive with a model number of HMS361008M5CE00 has the following features:
The new 3K8 Microdrive series for embedded applications has capacities of 6GB and 8GB. The 3K8 series uses a ZIF connector to interface to PATA, CE-ATA, or ATA on MMC interfaces in devices such as mobile phones and ultra-small consumer electronics devices. Despite its higher capacity, the 3K8 actually has a smaller form factor than the 3K6 and previous Microdrive generations: It weighs just 13g, with dimensions of 40x30x5mm. The 3K8 series also features increased shock resistanceit can handle an operational shock of up to 400G (2ms). Areal density has increased with each Microdrive generation, from as little as 5.04Gb/square inch with the original 170MB model up to 119Gb/square inch in the 3K8 series. In 4GB and larger drives, Hitachi uses a five-layer version of the Pixie Dust AFC media technology originally developed by IBM. To enable the increased areal density to be used as completely as possible, Hitachi also developed smaller hard disk read/write head technology. Starting in 2003, Hitachi began to use femto sliders for the read/write heads used in several small hard disk series, including the Microdrive 3K6 and 3K8 as well as the Travelstar 7K60, E7K60, 7K100, E7K100, and C4K60 Slim drives. Femto sliders are only 20% of the size of the pioneering Mini hard disk slider introduced in 1980. See the www.hitachigst.com website for more information about Microdrive products, a compatibility matrix, and other information.
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
As distinct from diskette types and formats, six drive types have been installed in PC-compatible systems: 5.25-inch 160/180 KB (SSDD) Single-Sided, Double-Density(SSDD) was the standard FDD in very early PC-class systems. These drives read and write only SSDD diskettes. 5.25-inch 320/360 KB (DSDD) Double-Sided, Double-Density(DSDD) was the standard FDD in PC-class systems, and was often found as a second FDD in early AT and 386 systems. The...
2. How to choose a Tape Backup Drive
Choosing a tape backup drive can be a simple job if you need to back up a single standalone system with a relatively small hard drive. The decision becomes more complex if the system has a larger hard drive or if you must back up a desktop system as well as a laptop. Choosing a tape backup drive type can be an even more complex program if you must back up a network server's hard drives and perhaps even back up the workstations from the server. As you ponder which backup tape drive you should select, consider the following facto...
3. DVD Copy Protection
DVD video discs employ several levels of protection that are mainly controlled by the DVD Copy Control Association (DVD CCA) and a third-party company called Macrovision. This protection typically applies only to DVD-Video discs, not DVD-ROM software. So, for example, copy protection might affect your ability to make backup copies of The Matrix, but it won't affect a DVD encyclopedia or other software application distributed on DVD-ROM discs. Note that every one of these protection systems has been broken, so with a lit...
4. How to Manually Resolve Motherboard Conflicts
In the past, the only way to resolve conflicts manually was to take the cover off your system and start changing switches or jumper settings on the adapter cards. Fortunately, this is a bit easier with plug-and-play because all the configuration is done via the Device Manager software included in the operating system. Although some early plug-and-play cards also had jumper switches or setup options to enable them to be configured manually, this feature was found primarily on ISA PnP-compatible cards. Be sure you write down or print o...
In 1957, Cyril Northcote Parkinson published his famous compilation of essays titled Parkinson's Law, which begins with the statement, "Work expands so as to fill the time available for its completion." A corollary of Parkinson's most famous "law" can be applied to hard drives: "Data expands so as to fill the space available for its storage." This, of course, means that no matter how big a drive you get, you will find a way to fill it. I know that I have lived by that dictum since purchasing my first hard disk drive more than 2...
6. How Magnetic Fields Are Used to Store Data
All magnetic storage devices read and write data by using electromagnetism. This basic principle of physics states that as an electric current flows through a conductor (wire), a magnetic field is generated around the conductor. Note that electrons actually flow from negative to positive as shown in the figure, although we normally think of current flowing in the other direction Electromagnetism was discovered in 1819 by Danish physicist Hans Christian Oersted, when he found that a compass needle would deflect away from p...
7. Hard Disk Form Factors
The cornerstone of the PC industry has always been standardization. With disk drives, this is evident in the physical and electrical form factors that comprise modern drives. By using industry-standard form factors, you can purchase a system or chassis from one manufacturer and yet physically and electrically install a drive from a different manufacturer. Form factor standards ensure that available drives will fit in the bay, the screw holes will line up, and the standard cables and connections will plug in. Without these indus...
8. Magneto Optical Drives
One of the most neglected types of removable-drive technologies is the magneto-optical (MO) drive. Introduced commercially in 1985, magneto-optical drives are now available in capacities exceeding 9GB. Two sizes of magneto-optical media and drives are available for desktop computers: 3 1/2" and 5 1/4". The 3 1/2" drives have capacities up to 2.3GB, and the 5 1/4" drives have capacities up to 9.1GB. 12" MO drives are also available for enterprise systems. Originally, magneto-optical drives were strictly WORM (write once, r...