In: Categories » Electronics and communication » Protocols » History of the Internet
|
During the 1960s, the U.S. Department of Defense’s Advanced Research Projects Agency (ARPA, later called DARPA) began an experimental wide area network (WAN) that spanned the United States. Called ARPANET, its original goal was to enable government affiliations, educational institutions, and research laboratories to share computing resources and to collaborate via file sharing and electronic mail. It didn’t take long, however, for DARPA to realize the advantages of ARPANET and the possibilities of providing these network links across the world. By the 1970s, DARPA continued aggressively funding and conducting research on ARPANET, to motivate the development of the framework for a community of networking technologies. The result of this framework was the Transmission Control Protocol/Internet Protocol (TCP/IP) suite. (A protocol is basically defined as a set of rules for communication over a computer network.) To increase acceptance of the use of protocols, DARPA disclosed a less expensive implementation of this project to the computing community. The University of California at Berkeley’s Berkeley Software Design (BSD) UNIX system was a primary target for this experiment. DARPA funded a company called Bolt Beranek and Newman, Inc. (BBN) to help develop the TCP/IP suite on BSD UNIX. This new technology came about during a time when many establishments were in the process of developing local area network technologies to connect two or more computers on a common site. By January 1983, all of the computers connected on ARPANET were running the new TCP/IP suite for communications. In 1989, Conseil Europeén pour la Recherche Nucléaire (CERN), Europe’s highenergy physics laboratory, invented the World Wide Web (WWW). CERN’s primary objective for this development was to give physicists around the globe the means to communicate more efficiently using hypertext. At that time, hypertext only included document text with command tags, which were enclosed in <angle brackets>. The tags were used to markup the document’s logical elements, for example, the title, headers and paragraphs. This soon developed into a language by which programmers could generate viewable pages of information called Hypertext Markup Language (HTML). In February 1993, the National Center for Supercomputing Applications at the University of Illinois (NCSA) published the legendary browser, Mosaic. With this browser, users could view HTML graphically presented pages of information. At the time, there were approximately 50 Web servers providing archives for viewable HTML. Nine months later, the number had grown to more than 500. Approximately one year later, there were more than 10,000 Web servers in 84 countries comprising the World Wide Web, all running on ARPANET’s backbone called the Internet. Today, the Internet provides a means of collaboration for millions of hosts across the world. The current backbone infrastructure of the Internet can carry a volume well over 45 megabits per second (Mb), about one thousand times the bandwidth of the original ARPANET. (Bandwidth is a measure of the amount of traffic a media can handle at one time. In digital communication, this describes the amount of data that can be transmitted over a communication line at bits per second, commonly abbreviated as bps.)
|
legal disclaimer
1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.
related articles
The first goal is detection. Can we tell when someone powers on a card within range of the local network? This can be done with off-the-shelf components and free software. The Cisco Aironet driver included with the more recent Linux kernels supports "RF Monitor" mode, which permits promiscuous monitoring of 802.11 packets - specifically, monitoring raw 802.11 frames to detect if there are any telltale frames broadcast by a rogue access point or card. As outlined in the original 802.11 specification, ther...
2. The HTTP Request and Response Codes
The HTTP protocol can be likened to a conversation based on a series of questions and answers, which we refer to respectively as HTTP requests and HTTP responses. The contents of HTTP requests and responses are easy to read and understand, being near to plain English in their syntax. This section examines the structure of these requests and responses, along with a few examples of the sorts of data they may contain. The HTTP Request After opening a connection to the intended serv...
3. INFRASTRUCTURE PROTOCOLS AND APPLICATIONS
H.323 H.323 defines packet standards for terminal equipment and services for multimedia communications over local and wide area networks communicating with systems connected to telephony networks such as ISDN. The initial version of this standard came from the International Telecommunications Union (ITU) in June 1996. It defines communication over IP-based local area networks (LANs). A later version (v2), adopted in January 1998, extended it over wide are...
4. Wireless IN Services
The IN protocols and concepts can be used to implement enhanced wireless services rapidly and to have these services available across serving areas in an untethered wireless network. Some of these services are listed below: Voice-Based User Identification. This service employs a form of automatic speech recognition to validate the identity of the speaker. Access to services can then be restricted to the user whose voice (phrase) has been used to train the recognition device. Voice-Based Featur...
The Wireless Internet is not just wireless communications across town or the country. It is also local—sometimes in a home or office building. Wireless LANs are just becoming popular with economically priced wireless Ethernet equipment. Standards such as IEEE 802.11, HiperLAN2, and Home RF are leading the way to untethered communications in-building or outside over small areas. Another important development is the Personal Area Network, also known as Bluetooth. Let’s take a look at each of th...
6. The Domain Concept
The solution to all of these problems is the network domain. In a domain, you only have a single name and password, which gets you into every shared PC and printer on the network. Everyone's account information resides on a central computer called a domain controllera computer so important, it's usually locked away in a closet or a data-center room. A domain controller keeps track of who is allowed to log on, who is logged on, and what each person is allowed to do on the network. When you log onto the domain with your PC,...
7. Duplexing Techniques in Wireless communication systems
Wireless communication systems have evolved through several stages of multiple-access control. The foremost controllable resource has always been the frequency spectrum. Other resources such as time, code, and space were initially manipulated in a very precarious and, therefore, ineffective manner. The early systems operated in the simplex mode in the forward link. Halfduplex systems soon appeared, in which forward link and reverse link shared the same channel. Access control was performed on a push-to-talk basis wit...
8. Wireless Networks (WiFi or 802.11)
Millions of people, have embraced the flexibility of a networking system that involves no wires at alla cordless networking technology called WiFi or 802.11 ("eight-oh-two dot eleven"). (Your Macintosh friends probably call the same thing AirPort, because that's what Apple calls it.) To get onto a wireless network, your PC needs a WiFi transmitter. Almost every laptop sold today has WiFi built in. You can also add it to a desktop in the form of a wireless card or USB adapter; either way, you gain a little antenna. Once...