Comparing Disk Tape and Flash Memory Technologies

written by: Steve Hariton; article published: year 2006, month 10;



In: Categories » Computers and technology » Storage devices » Comparing Disk Tape and Flash Memory Technologies

Several types of removable-media disk drives are commonly used. Traditionally, the most common varieties have used magnetic media, but some use one of two combinations of magnetic and optical storage: floptical or magneto-optical. Floptical and magneto-optical media drives encode information on disk by using different combinations of laser and magnetic technologies.

Flash memory devices, which have largely replaced the floppy disk for data transfer, emulate disk drives. Some tape drives are also capable of emulating disk drives by providing drive letter access to a portion of the media, but these drives are used primarily to perform streaming backups of large disk drives and network drive arrays.

Magnetic Disk Media

Whether you are looking at "pure" magnetic media, floptical media, or magneto-optical drives, all types of magnetic disk media share similar characteristics. Disk media is more expensive per megabyte or gigabyte than tape, usually has a lower capacity, and is more easily used on a file-by-file basis as compared to tape. Disk media uses random access, which enables you to find, use, modify, or delete any file or group of files on a disk without disturbing the rest of the disk's contents. When used as a backup medium, most types of disk media are faster for copying a few files but are typically slower for copying large numbers of files or entire drives.

Magnetic Tape Media

Tape media has much less expensive costs overall per megabyte or gigabyte than disk media, has a higher total capacity, and is more easily used on an image or multiple-file basis. Tape drives use sequential access, meaning that the contents of a tape must be read from the beginning and that individual files must be retrieved in the order found on the tape. Also, individual files usually can't be modified on the tape or removed from the tape; the contents of the entire cartridge must be deleted and rewritten. Thus, tape drives are more suited for complete backups of entire hard disks including all applications and data. Because it is suited for mass backup, tape can be difficult to use for copying single files.

Note

Removable-media disk drives can be used as system backup devices similar to tape. However, the higher price of the medium itself (disks or cartridges) and the generally slower speed at which they perform can make this use somewhat prohibitive on a large scale. For file-by-file backups, disk media is ideal; if, however, you're completely backing up entire drives or systems, tape is faster and more economical.

Flash Memory Media

The newest type of removable storage is not magnetically based but uses flash memorya special type of solid-state memory chip that requires no power to maintain its contents. Flash memory cards can easily be moved from digital cameras to notebook or desktop computers and can even be inserted into photo printers or self-contained photo display devices. Flash memory can be used to store any type of computer data, but its original primary application was digital photography. However, more and more digital music players have removable flash memory cards, and so-called thumb or keychain flash memory devices that plug directly into a USB port are helping to make flash memory a mainstream storage medium and an increasingly popular replacement for some types of magnetic removable-media storage, particularly floppy disks, Zip drives, and SuperDisk drives.

Tip

Literally dozens of removable storage devices are currently on the market. Be sure to compare your chosen solution against the competition before making a final purchase. Be especially wary of missing statistics in press releases and product packagingmanufacturers are apt to omit a specification if their drives don't measure up to the competition.

legal disclaimer

1) Our website is not responsible for the information contained by this article as well for any and all copyright infringements by authors and writers. E-articles is a free information resource. If you suspect this article for any copyright infringements, please read the Terms of service and contact us to investigate the problem.
2) The E-articles directory team is not responsible for inaccuracies, falsehoods, or any other types of misinformation this tutorial may contain and will not be liable for any loss or damage suffered by a user through the user's reliance on the information gained here. Please read the Terms of service

Useful tools and features

Translate this article to...    Send this article to you or to a friend

Link to this article from your page   
If you like this article (tutorial), please link to it from your web page using the information above. Linking to this page, this is the only way to help us improve our service, the same time providing your visitors with a way to improve their online experience.

related articles

1. High Capacity Magnetic Storage Devices
High-capacity removable media drives are an ever-shrinking category. With competition at the low end (1GB and under capacities) from USB flash memory keychain drives and at higher capacities from external mini-hard disks (4GB and up), rewritable DVD (8.5GB), and larger USB and FireWire hard disks (20GB and up), there are only two current product families, both from Iomega: Zip. Flexible media, with capacities of 100MB, 250MB, and 750MB REV. Rigid media, with capacity of 35GB (native...

2. Handling CD Read Errors
Handling errors when reading a disc was a big part of the original Red Book CD standard. CDs use parity and interleaving techniques called cross-interleave Reed-Solomon code (CIRC) to minimize the effects of errors on the disk. This works at the frame level. When being stored, the 24 data bytes in each frame are first run through a Reed-Solomon encoder to produce a 4-byte parity code called "Q" parity, which then is added to the 24 data bytes. The resulting 28 bytes are then run though another encoder that uses a different scheme...

3. Floppy Drive Types
As distinct from diskette types and formats, six drive types have been installed in PC-compatible systems: 5.25-inch 160/180 KB (SSDD) Single-Sided, Double-Density(SSDD) was the standard FDD in very early PC-class systems. These drives read and write only SSDD diskettes. 5.25-inch 320/360 KB (DSDD) Double-Sided, Double-Density(DSDD) was the standard FDD in PC-class systems, and was often found as a second FDD in early AT and 386 systems. The...

4. How to choose a Tape Backup Drive
Choosing a tape backup drive can be a simple job if you need to back up a single standalone system with a relatively small hard drive. The decision becomes more complex if the system has a larger hard drive or if you must back up a desktop system as well as a laptop. Choosing a tape backup drive type can be an even more complex program if you must back up a network server's hard drives and perhaps even back up the workstations from the server. As you ponder which backup tape drive you should select, consider the following facto...

5. DVD Copy Protection
DVD video discs employ several levels of protection that are mainly controlled by the DVD Copy Control Association (DVD CCA) and a third-party company called Macrovision. This protection typically applies only to DVD-Video discs, not DVD-ROM software. So, for example, copy protection might affect your ability to make backup copies of The Matrix, but it won't affect a DVD encyclopedia or other software application distributed on DVD-ROM discs. Note that every one of these protection systems has been broken, so with a lit...

6. How to Manually Resolve Motherboard Conflicts
In the past, the only way to resolve conflicts manually was to take the cover off your system and start changing switches or jumper settings on the adapter cards. Fortunately, this is a bit easier with plug-and-play because all the configuration is done via the Device Manager software included in the operating system. Although some early plug-and-play cards also had jumper switches or setup options to enable them to be configured manually, this feature was found primarily on ISA PnP-compatible cards. Be sure you write down or print o...

7. Hard Drive Advancements
In 1957, Cyril Northcote Parkinson published his famous compilation of essays titled Parkinson's Law, which begins with the statement, "Work expands so as to fill the time available for its completion." A corollary of Parkinson's most famous "law" can be applied to hard drives: "Data expands so as to fill the space available for its storage." This, of course, means that no matter how big a drive you get, you will find a way to fill it. I know that I have lived by that dictum since purchasing my first hard disk drive more than 2...

8. How Magnetic Fields Are Used to Store Data
All magnetic storage devices read and write data by using electromagnetism. This basic principle of physics states that as an electric current flows through a conductor (wire), a magnetic field is generated around the conductor. Note that electrons actually flow from negative to positive as shown in the figure, although we normally think of current flowing in the other direction Electromagnetism was discovered in 1819 by Danish physicist Hans Christian Oersted, when he found that a compass needle would deflect away from p...

9. Hard Disk Form Factors
The cornerstone of the PC industry has always been standardization. With disk drives, this is evident in the physical and electrical form factors that comprise modern drives. By using industry-standard form factors, you can purchase a system or chassis from one manufacturer and yet physically and electrically install a drive from a different manufacturer. Form factor standards ensure that available drives will fit in the bay, the screw holes will line up, and the standard cables and connections will plug in. Without these indus...

10. Magneto Optical Drives
One of the most neglected types of removable-drive technologies is the magneto-optical (MO) drive. Introduced commercially in 1985, magneto-optical drives are now available in capacities exceeding 9GB. Two sizes of magneto-optical media and drives are available for desktop computers: 3 1/2" and 5 1/4". The 3 1/2" drives have capacities up to 2.3GB, and the 5 1/4" drives have capacities up to 9.1GB. 12" MO drives are also available for enterprise systems. Originally, magneto-optical drives were strictly WORM (write once, r...